SILO TEMPERATURE SENSOR - WATERTIGHT IP65 TER-616/T

The silo temperature sensor has to be installed inside the silo higher room, where air is clean. It signals an overheating state caused by an ongoing or a smoldering fire. Its NO normally open contact will close when the temperature reaches 88°C (190°F), and it will return back to the open state as soon as the temperature decreases below 88°C (190°F). It needs a power supply voltage of 24VDC and it is used to control an optical and acoustical alarm signal. The protection level is IP65 (watertight) and its output is by free leads. Two holes in the base are provided for wall mounting by two M5 screws.

IMPORTANT
Do not force the sensor rod in order to avoid temperature setting changes or sensor damage. During the installation use a hexagonal key to block the hexagonal head.